Installation and configuration, there are several installation or installation options for low-voltage Hall sensors. The panel installation design is to install the panel on the wall or in modular units. SMD is a circuit mount device assembled from surface mount components and technology. The SMD current sensor is directly connected to the circuit board without the need to install wires in the holes on the circuit board. Clamp or bolt the sensor onto the surface. They are best used in rough or extreme applications to prevent sensor detachment.

Through hole technology (THT) involves inserting component leads into holes on a printed circuit board, and then soldering the leads to the other side of the board to mount the components onto the board. Surface mount technology (SMT) adds current sensors to a printed circuit board (PCB) by soldering component leads or terminals onto the upper surface of the PCB. Handheld products are portable and do not require special installation hardware. Loop type sensors can be closed-loop - meaning they must completely surround the current carrying wire - or open-loop without forming a complete circle. Low voltage Hall sensor open-loop and closed-loop current sensor. Open loop sensors are typically used in battery powered applications. Compared to closed-loop sensors, they require less power and are better able to withstand overloads. Compared with open-loop sensors, closed-loop current sensors have faster response time and better linearity. They also generate less noise, making them a great choice for power conversion. Both open-loop current sensors and closed-loop current sensors are used in hazardous environments.